palate_shelf
designer claire terry from madame fancy pants sent in this full diy idea. the other day her mom decided to reclaim the bookcase she’d let claire borrow, so quick replacement shelving was claire’s goal. she happened to have a few wooden pallets around her house (“people always asked ‘why do you have pallets lying around’ and i always replied ‘they will come in handy one day’ “) so she came up with these fun shelves crafted together from pallets and a few pieces of extra wood. claire’s been kind enough to share her how-to instructions with us below, so be sure to check out the full project after the jump. thanks, claire!

CLICK HERE for the full project after the jump!

You will need:

-Wooden Pallets
-Screws
-Drill
-Hollow wall anchors (depending on your walls)
-thick timber
-paint

1. Gather some pieces of thick wood (mine were about 1.5 inches) the desired length of your shelves and paint them the color you fancy. (These will act as the actual shelf portion of your pallet- unless you pallet wood is wide enough to use as actual shelves)

2. Using the bottom of the pallets, balance your painted wood pieces on the long end of the pallet (where you would like the shelves to go) and then add a few screws in the back so they don’t shift.

(The shelves will now be secured and balancing on the long bits of the palate so they should hold a good amount of weight.)

3. I put my larger pallet on the bottom and the smaller one sitting on the top. Once you have the pallets in the formation you would like them to stay in, grab your drill and drill into the pallet and wall (if you can find a stud to screw into that would be super secure!). I put in 3 long screws into hollow wall anchors.

4. The weight and the tension of the top pallet holds the bottom one up so you shouldn’t need any screws in the bottom pallet. Then..viola!…….put your books and trinkets up!

Read more at Design*Sponge http://www.designspongeonline.com/2009/08/diy-project-claires-pallet-shelf.html#ixzz1CdSODSg7

Advertisements